Professional Coatings & Supplies
The full ONVEXA range — primers and vapour control through body coats, decorative media, finish coats and the ancillaries that finish the job.
Organised the way a floor is built.
Products are grouped by where they sit in a build rather than by chemistry alone, so the range reads in the order a crew works through it. 23 products across 6 families.
Primers & vapour control
The layer that decides whether everything above it stays down.
Epoxy Primer & Binder
Solvent-free two-component epoxy primer and aggregate binder. The default primer for sound, dry concrete.
Primer PR-15Fast-Set Primer
High-solids, fast-setting adhesion-promoting primer for jobs where the next coat has to go on the same day.
Primer PR-30Moisture-Tolerant Primer
Epoxy primer for damp or green concrete where a full vapour barrier is not required.
Primer MV-60Vapour Control Membrane
Low-permeability epoxy moisture-vapour barrier for slabs with elevated internal relative humidity.
Moisture mitigationBody coats & mortars
Where the thickness and the mechanical performance come from.
High-Build Epoxy
Pigmented, solvent-free high-build body coat. The workhorse layer in an industrial build.
Body coat EP-45Clear Broadcast Base Coat
Clear high-solids epoxy base coat for full-broadcast flake and quartz systems.
Base coat SL-50Self-Levelling Epoxy
Trowel-and-spike self-levelling epoxy for a smooth, seamless floor over a prepared slab.
Self-levelling MT-70Epoxy Trowel Mortar
Trowel-applied epoxy mortar for repairs, ramps, feathered edges and heavy-wear build-up.
Trowelled mortarDecorative media
Flake, quartz and metallic — the layer people actually see.
Metallic Epoxy Body Coat
Pigment-carrying metallic body coat for movement, depth and figure in a decorative floor.
Decorative body coat FL-SeriesDecorative Flake Blends
Standard and designer vinyl chip blends for full and partial broadcast systems.
Broadcast media QZ-SeriesColoured Quartz Aggregate
Ceramic-coated coloured quartz for textured, slip-conscious broadcast systems.
Broadcast mediaFinish coats
Wear surface, sheen, UV stability and return-to-service time.
Polyaspartic Topcoat
Two-component polyaspartic finishing coat for fast-cure builds and short shutdown windows.
Topcoat PX-88Polyaspartic Clear Sealer
Clear seal coat that locks down broadcast media before the wear coat goes on.
Seal coat PU-90Urethane Topcoat
Abrasion- and chemical-resistant UV-stable urethane finish for hard-service floors.
Topcoat PU-95Matte Urethane Topcoat
Low-sheen urethane finish where glare, reflection or a softer look matters.
TopcoatChemical & heavy duty
Built against a specific exposure list, not a general claim.
Novolac Epoxy Coating
Novolac epoxy for splash, spill and immersion exposure. Specified against your actual chemical list.
Chemical-resistant coating UC-300Urethane Cement Slurry
Urethane-cement slurry for thermal shock, steam cleaning and daily wash-down.
Heavy-duty body coat UC-310Urethane Cement Mortar
Trowelled urethane-cement mortar for the hardest thermal and mechanical service.
Heavy-duty mortar ED-400ESD Epoxy Coating
Electrostatic dissipative coating for electronics assembly and volatile-material handling.
Static control coatingRepair & ancillary
Coving, joints, cracks and the concrete underneath.
Crack & Joint Filler
Semi-rigid filler for control joints and static cracks ahead of coating.
Repair CV-08Clear Cove Resin
Clear epoxy binder for integral cove base and detailing mortars.
Detailing VP-09Vertical Adhesion Primer
Adhesive primer for vertical coving and detailing mortars that must not slump.
Primer DS-01Concrete Densifier & Sealer
Penetrating densifier for slabs staying exposed rather than being coated.
Concrete treatment