Demanding exposure

ONVEXA Chemical-Resistant System

Production · workshops. A compatible layer architecture ready for verified product selections and technical documentation.

Request pricing Technical support

Recommended environment

System overview

The layer architecture on the right is the shape of the build. Which ONVEXA products fill each layer is selected against the substrate, the exposure and the return-to-service window — two floors in the same building can take different specifications.

Professional applicationSystem compatibleDocument ready

Check this against your floor

05Chemical-resistant topcoatSpecified per project

04Reinforced body coatSpecified per project

03Exposure-matched primerSpecified per project

02Repair and levellingSpecified per project

01Prepared concreteSubstrate

Specified inside this system

Products that build it.

PR-30

Moisture-Tolerant Primer

Epoxy primer for damp or green concrete where a full vapour barrier is not required.

Primer MT-70

Epoxy Trowel Mortar

Trowel-applied epoxy mortar for repairs, ramps, feathered edges and heavy-wear build-up.

Trowelled mortar PU-90

Urethane Topcoat

Abrasion- and chemical-resistant UV-stable urethane finish for hard-service floors.

Topcoat CR-200

Novolac Epoxy Coating

Novolac epoxy for splash, spill and immersion exposure. Specified against your actual chemical list.

Chemical-resistant coating UC-300

Urethane Cement Slurry

Urethane-cement slurry for thermal shock, steam cleaning and daily wash-down.

Heavy-duty body coat UC-310

Urethane Cement Mortar

Trowelled urethane-cement mortar for the hardest thermal and mechanical service.

Heavy-duty mortar CV-08

Clear Cove Resin

Clear epoxy binder for integral cove base and detailing mortars.

Detailing VP-09

Vertical Adhesion Primer

Adhesive primer for vertical coving and detailing mortars that must not slump.

Primer

Technical specification

Build this system with technical support.

Request system pricing