ONVEXA PR-10
Epoxy Primer & Binder
Solvent-free two-component epoxy primer and aggregate binder. The default primer for sound, dry concrete.
Where PR-10 is used.
Dry, sound concrete
Binder for mortars and screeds
Under epoxy and polyaspartic builds
Inside the build.
PR-10 is specified as the primer in the systems below. The rest of the build is selected against the substrate, exposure and return-to-service window of the project.
Surface preparation
Concrete must be structurally sound, clean and prepared to the profile the system requires, with moisture assessed before any material goes down. ONVEXA technical confirms the required profile and moisture limits for your slab as part of the system specification.
Mixing & application
Mix ratio, induction time, spread rate, environmental window and recoat times are specific to the batch and the site conditions on the day. They are published in the product data sheet issued with your order and confirmed by technical before application.
Documentation
Data sheets are issued per product and per revision so crews are never working from a superseded document. Request the current set for PR-10 and it is sent with your quote.
Others in this part of the range.
Fast-Set Primer
High-solids, fast-setting adhesion-promoting primer for jobs where the next coat has to go on the same day.
View product PR-30Moisture-Tolerant Primer
Epoxy primer for damp or green concrete where a full vapour barrier is not required.
View product MV-60Vapour Control Membrane
Low-permeability epoxy moisture-vapour barrier for slabs with elevated internal relative humidity.
View product