ONVEXA PU-95
Matte Urethane Topcoat

Where PU-95 is used.

Inside the build.

PU-95 is specified as the topcoat in the systems below. The rest of the build is selected against the substrate, exposure and return-to-service window of the project.

Surface preparation

Concrete must be structurally sound, clean and prepared to the profile the system requires, with moisture assessed before any material goes down. ONVEXA technical confirms the required profile and moisture limits for your slab as part of the system specification.

Mixing & application

Mix ratio, induction time, spread rate, environmental window and recoat times are specific to the batch and the site conditions on the day. They are published in the product data sheet issued with your order and confirmed by technical before application.

Documentation

Data sheets are issued per product and per revision so crews are never working from a superseded document. Request the current set for PU-95 and it is sent with your quote.