Professional Epoxy Coatings
Primers, high-build body coats, self-levelling grades and trowelled mortars — the layers that carry the load of the system.
Built to sit inside a system.
Every product below is specified as part of a complete ONVEXA build. Selecting one in isolation is how compatible-looking floors come apart.
Epoxy Primer & Binder
Solvent-free two-component epoxy primer and aggregate binder. The default primer for sound, dry concrete.
Primer PR-30Moisture-Tolerant Primer
Epoxy primer for damp or green concrete where a full vapour barrier is not required.
Primer MV-60Vapour Control Membrane
Low-permeability epoxy moisture-vapour barrier for slabs with elevated internal relative humidity.
Moisture mitigation EP-40High-Build Epoxy
Pigmented, solvent-free high-build body coat. The workhorse layer in an industrial build.
Body coat EP-45Clear Broadcast Base Coat
Clear high-solids epoxy base coat for full-broadcast flake and quartz systems.
Base coat SL-50Self-Levelling Epoxy
Trowel-and-spike self-levelling epoxy for a smooth, seamless floor over a prepared slab.
Self-levelling MT-70Epoxy Trowel Mortar
Trowel-applied epoxy mortar for repairs, ramps, feathered edges and heavy-wear build-up.
Trowelled mortar MX-20Metallic Epoxy Body Coat
Pigment-carrying metallic body coat for movement, depth and figure in a decorative floor.
Decorative body coat CR-200Novolac Epoxy Coating
Novolac epoxy for splash, spill and immersion exposure. Specified against your actual chemical list.
Chemical-resistant coating ED-400ESD Epoxy Coating
Electrostatic dissipative coating for electronics assembly and volatile-material handling.
Static control coating RP-05Crack & Joint Filler
Semi-rigid filler for control joints and static cracks ahead of coating.
Repair CV-08Clear Cove Resin
Clear epoxy binder for integral cove base and detailing mortars.
Detailing VP-09Vertical Adhesion Primer
Adhesive primer for vertical coving and detailing mortars that must not slump.
Primer